CHEMICAL ENGINEERING PROJECT TOPICS AND MATERIALS

Showing all 72 results

A_COMPARATIVE_STUDY_OF_CHEMICAL_AND_MICROWAVE_SYNTHESIZED_ACTIVATED_CARBORN_FROM_CORN_COB
ADSORPTION AND KINETIC MODELLING OF HEAVY METALS UPTAKE FROM WASTEWATER EFFLUENTS
ADSORPTION AND PHOTOCATALYTIC DEGRADATION OF ACETAMINOPHEN USING ZnFe2O4-TiO2 COMPOSITE
ADSORPTION OF COPPER (II) ION FROM AQUEOUS SOLUTION ONTO THERMALLY TREATED EGGSHELL: KINETICS AND EQUILIBRIUM STUDY
Air Injection Studies For Enhanced Oil Recovery
ANALYSIS OF BUSH PEAR AND ITS OIL
APPLICATION OF SURFACTANTS IN TREATING OIL CONTAMINATED SOIL
APPLICATION OF ZEOLITE 4A – METAKAOLIN MATRIX FOR THE REMOVAL OF SOME HEAVY METALS FROM CRUDE OIL TANK FARM WASTEWATER
Assessment Of Carbon Monoxide (Co) Level In Enugu Metropolis Monitoring Industrial And Residential Area
ASSESSMENT OF DUMPSITE IMPACT ON SOIL AND GROUNDWATER QUALITY IN TUDUN WADA, KADUNA
BENEFICIATION OF BAUCHI GRAPHITE FOR CRUCIBLE PRODUCTION.
BENEFICIATION, DEPHOSPHORIZATION AND DESULPHURIZATION OF AGBAJA IRON ORE
CHROMIUM REMOVAL FROM CHELTECH (ZARIA) TANNERY EFFLUENT AS A FORM OF EFFLUENT TREATMENT
COMPARATIVE ANALYSIS OF COAL, FUEL OIL AND NATURAL GAS FOR CEMENT PRODUCTION
COMPARATIVE ANALYSIS OF VOID FRACTION CORRELATIONS FOR HIGH VISCOSITY OIL DATA IN HORIZONTAL PIPELINE
COMPARATIVE STUDY ON THE EFFECTS OF OXYGENATES ON BIODIESEL FROM FRESH AND USED COOKING OIL
DEPURATION STUDIES ON KADUNA REFINERY WASTEWATER USING MODIFIED Cu-DOPED GOETHITE CATALYST
DESIGN AND CONSTRUCTION OF A PILOT PLANT FOR THE PRODUCTION OF BIODIESEL FROM COTTONSEED OIL
DESIGN AND DEVELOPMENT OF A CARBONATOR FOR CARBON DIOXIDE CAPTURE USING LOCALLY PRODUCED LIME
DESIGN AND DEVELOPMENT OF SOFTWARE FOR SOLVING SHELL AND TUBE HEAT EXCHANGER WITH DOUBLE PASSES
DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY
DESIGN AND IMPLEMENT A COMPUTERIZED DRUG INFORMATION MANAGEMENT SYSTEM DRUG PROCUREMENT AND DISTRIBUTION TRACKING SYSTEM
DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS IN SOIL SAMPLES AROUND SELECTED ABUAD POWER GENERATORS
DEVELOPMENT AND CHARACTERIZATION OF BRIQUETTE FROM TANNERY SOLID WASTE
DEVELOPMENT AND CHARACTERIZATION OF SELF-HEALING CAR PAINT USING CHITOSAN
DEVELOPMENT OF ADSORBENTS AND PHOTOCATALYSTS USING NIGERIAN PINDIGA BENTONITIC CLAY
DEVELOPMENT OF BAOBAB/SISAL REINFORCED LOW DENSITY POLYETHYLENE HYBRID COMPOSITE
DEVELOPMENT OF CHITOSAN-RICE HUSK ASH COMPOSITE ADSORBENT FOR REMOVAL OF CRUDE OIL FROM CONTAMINATED WATER
DEVELOPMENT OF EUCALPYTUS TERETICORNIS COMPOSITE (BARKS AND LEAVES) ADSORBENT FOR ADSORPTION OF CHROMIUM (VI) AND LEAD (II) IONS FROM SIMULATED WASTEWATER
DEVELOPMENT OF PILOT SIZE PROCESS FOR ZEOLITE Y AND ZSM-5 PRODUCTION FROM KANKARA KAOLIN
DEVELOPMENT OF PILOT-SCALE REACTOR FOR THE PRODUCTION OF ALUMINIUM HYDROXIDE FROM ALUM DERIVED FROM KANKARA KAOLIN FOR ZEOLITE Y SYNTHESIS
DEVELOPMENT OF Pt-Zn/Al2O3 CATALYST FOR n-OCTANE REFORMING
DEVELOPMENT OF ZEOLITE Y AND ZSM5 COMPOSITE CATALYST FROM KANKARA KAOLIN
DEVELOPMENT OF ZnO/SiO2 PHOTOCATALYSTS FOR ESTERIFICATION OF WASTE COOKING OIL
DYNAMIC MODEL DEVELOPMENT AND RECEDING HORIZON CONTROL OF BLOOD GLUCOSE CONCENTRATION
EFFECT OF ASPERGILLUS NIGER AMYLASES ON CASSAVA STARCH HYDROLYSIS
EFFECT OF CALCINATION TEMPERATURE ON THE COMPOSITION AND PHOTOCATALYTIC ACTIVITY OF NIGERIAN NATURAL ILMENITE, SPHALERITE AND WOLFRAMITE
EFFECT OF EGGSHELL AS A FILLER ON THE MECHANICAL PROPERTIES OF FLEXIBLE POLYURETHANE FOAM
EFFECT OF FOAMING AGENTS ON CRUDE OIL SYSTEM
EFFECT OF PARTICLE SIZE ON OIL YIELD USING SCENT BEAN SEED (‘OZAKI’).
Effect Of Particle Size On Oil Yield Using Scent Bean Seed (‘Ozaki’)
EFFECTS OF FORMATION DAMAGE ON OIL WELL PRODUCTIVITY
ENGINEERING DESIGN AND PREDICTION OF HYDRATE FORMATION FOR A GAS PIPELINE
ENHANCEMENT OF CELLULOSIC ETHANOL PRODUCTION THROUGH ASPERGILLUS NIGER MODIFICATION
ENHANCING LIGHT-ENDS RECOVERY THROUGH JOINT ATMOSPHERIC DISTILLATION OF HEAVY CRUDE AND USED ENGINE OIL
EXTRACTION AND CHARACTERISATION OF CHITIN AND CHITOSAN FOR CHROMIUM (VI) ION REMOVAL FROM WASTEWATER
EXTRACTION AND FORMULATION OF PERFUME FROM LEMONGRASS LEAVES
EXTRACTION AND FORMULATION OF PERFUME FROM PLANT
INVESTIGATION OF THE TRANSPORT PROFILE AND DISPERSION OF ATMOSPHERIC AEROSOL OVER THE COASTAL REGION OF LAGOS
MATHEMATICAL MODELING AND DYNAMIC SIMULATION OF TEMPERATURE DISTRIBUTION IN A CHAMBER FURNACE
MODELLING AND SIMULATION OF A TRAY DRYER USING MATLAB
MODELLING AND SIMULATION OF TRANESTERIFICATION OF WASTE VEGETABLE OIL (FRYING OIL) IN A BATCH REACTOR
MODELLING, SIMULATION AND CONTROL OF A REACTIVE DISTILLATION PROCESS FOR FUEL ADDITIVE PRODUCTION
MODELLING, SIMULATION AND CONTROL OF THE REACTIVE DISTILLATION OF BIODIESEL PRODUCTION
MODELLING, SIMULATION AND OPTIMIZATION OF FATTY ACID METHYL ESTER REACTIVE DISTILLATION PROCESS USING ASPEN HYSYS
MODELLING, SIMULATION AND SENSITIVITY ANALYSIS OF A FATTY ACID METHYL ESTER (FAME) REACTIVE DISTILLATION (RD) PROCESS USING ASPEN PLUS
MODIFICATION OF SURFACE, PHYSICAL AND CHEMICAL PROPERTIES OF ACTIVATED CARBONS FOR WATER PURIFICATION
PID CONTROL OF A FATTY ACID METHYL ESTER REACTIVE DISTILLATION PROCESS
PIPELINE PRODUCTS MARKETING COMPANY (PPMC) DEPOT OPERATIONS
PRODUCTION OF EMULSION PAINT USING DYED CASSAVA STARCH AS PIGMENT
Refining Of Palm Kernel Oil
REFINING OF SOYA BEAN OIL
STUDIES OF REGENERATION OF CATALYTIC REFORMING CATALYST
STUDIES ON THE TREATMENT OF COAL AND BREWERY WASTEWATER USING ADSORPTION AND COAGULATION– FLOCCULATION TECHNIQUES.
STUDYING THE OPTIMAL CONDITIONS FOR GLUCOSE AND BIO-ETHANOL PRODUCTION FROM SPIROGYRA AFRICANA
SYNTHESIS OF IMMOBILIZED MOLYBDENUM CATALYST FOR OXIDATION PROCESSES
THE EFFECT OF TEMPERATURE ON HYDROLYSIS OF CELLULOSE (SAW-DUST)
THE KINETIC STUDY ON HYDROLYSIS OF CELLULOSE (SAW-DUST)
THE PRODUCTION OF YAM FLOUR
THE PRODUCTION OF β – SIALON BY CARBOTHERMAL REDUCTION AND NITRIDATION OF KANKARA CLAY
TRANSESTERIFICATION OF WASTE VEGETABLE OIL USING ANTHILL AS CATALYST
TREATMENT OF WATER FROM BORE HOLE USING MORINGA OLEIFERA SEED AND COMMERCIAL ACTIVATED CARBON

CHEMICAL ENGINEERING PROJECT TOPICS AND MATERIALS

A_COMPARATIVE_STUDY_OF_CHEMICAL_AND_MICROWAVE_SYNTHESIZED_ACTIVATED_CARBORN_FROM_CORN_COB

ADSORPTION AND KINETIC MODELLING OF HEAVY METALS UPTAKE FROM WASTEWATER EFFLUENTS

ADSORPTION AND PHOTOCATALYTIC DEGRADATION OF ACETAMINOPHEN USING ZnFe2O4-TiO2 COMPOSITE

ADSORPTION OF COPPER (II) ION FROM AQUEOUS SOLUTION ONTO THERMALLY TREATED EGGSHELL: KINETICS AND EQUILIBRIUM STUDY

Air Injection Studies For Enhanced Oil Recovery

ANALYSIS OF BUSH PEAR AND ITS OIL

APPLICATION OF SURFACTANTS IN TREATING OIL CONTAMINATED SOIL

APPLICATION OF ZEOLITE 4A – METAKAOLIN MATRIX FOR THE REMOVAL OF SOME HEAVY METALS FROM CRUDE OIL TANK FARM WASTEWATER

Assessment Of Carbon Monoxide (Co) Level In Enugu Metropolis Monitoring Industrial And Residential Area

ASSESSMENT OF DUMPSITE IMPACT ON SOIL AND GROUNDWATER QUALITY IN TUDUN WADA, KADUNA

BENEFICIATION OF BAUCHI GRAPHITE FOR CRUCIBLE PRODUCTION.

BENEFICIATION, DEPHOSPHORIZATION AND DESULPHURIZATION OF AGBAJA IRON ORE

CHROMIUM REMOVAL FROM CHELTECH (ZARIA) TANNERY EFFLUENT AS A FORM OF EFFLUENT TREATMENT

COMPARATIVE ANALYSIS OF COAL, FUEL OIL AND NATURAL GAS FOR CEMENT PRODUCTION

COMPARATIVE ANALYSIS OF VOID FRACTION CORRELATIONS FOR HIGH VISCOSITY OIL DATA IN HORIZONTAL PIPELINE

COMPARATIVE STUDY ON THE EFFECTS OF OXYGENATES ON BIODIESEL FROM FRESH AND USED COOKING OIL

DEPURATION STUDIES ON KADUNA REFINERY WASTEWATER USING MODIFIED Cu-DOPED GOETHITE CATALYST

DESIGN AND CONSTRUCTION OF A PILOT PLANT FOR THE PRODUCTION OF BIODIESEL FROM COTTONSEED OIL

DESIGN AND DEVELOPMENT OF A CARBONATOR FOR CARBON DIOXIDE CAPTURE USING LOCALLY PRODUCED LIME

DESIGN AND DEVELOPMENT OF SOFTWARE FOR SOLVING SHELL AND TUBE HEAT EXCHANGER WITH DOUBLE PASSES

DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY

DESIGN AND IMPLEMENT A COMPUTERIZED DRUG INFORMATION MANAGEMENT SYSTEM DRUG PROCUREMENT AND DISTRIBUTION TRACKING SYSTEM

DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS IN SOIL SAMPLES AROUND SELECTED ABUAD POWER GENERATORS

DEVELOPMENT AND CHARACTERIZATION OF BRIQUETTE FROM TANNERY SOLID WASTE

DEVELOPMENT AND CHARACTERIZATION OF SELF-HEALING CAR PAINT USING CHITOSAN

DEVELOPMENT OF ADSORBENTS AND PHOTOCATALYSTS USING NIGERIAN PINDIGA BENTONITIC CLAY

DEVELOPMENT OF BAOBAB/SISAL REINFORCED LOW DENSITY POLYETHYLENE HYBRID COMPOSITE

DEVELOPMENT OF CHITOSAN-RICE HUSK ASH COMPOSITE ADSORBENT FOR REMOVAL OF CRUDE OIL FROM CONTAMINATED WATER

DEVELOPMENT OF EUCALPYTUS TERETICORNIS COMPOSITE (BARKS AND LEAVES) ADSORBENT FOR ADSORPTION OF CHROMIUM (VI) AND LEAD (II) IONS FROM SIMULATED WASTEWATER

DEVELOPMENT OF PILOT SIZE PROCESS FOR ZEOLITE Y AND ZSM-5 PRODUCTION FROM KANKARA KAOLIN

DEVELOPMENT OF PILOT-SCALE REACTOR FOR THE PRODUCTION OF ALUMINIUM HYDROXIDE FROM ALUM DERIVED FROM KANKARA KAOLIN FOR ZEOLITE Y SYNTHESIS

DEVELOPMENT OF Pt-Zn/Al2O3 CATALYST FOR n-OCTANE REFORMING

DEVELOPMENT OF ZEOLITE Y AND ZSM5 COMPOSITE CATALYST FROM KANKARA KAOLIN

DEVELOPMENT OF ZnO/SiO2 PHOTOCATALYSTS FOR ESTERIFICATION OF WASTE COOKING OIL

DYNAMIC MODEL DEVELOPMENT AND RECEDING HORIZON CONTROL OF BLOOD GLUCOSE CONCENTRATION

EFFECT OF ASPERGILLUS NIGER AMYLASES ON CASSAVA STARCH HYDROLYSIS

EFFECT OF CALCINATION TEMPERATURE ON THE COMPOSITION AND PHOTOCATALYTIC ACTIVITY OF NIGERIAN NATURAL ILMENITE, SPHALERITE AND WOLFRAMITE

EFFECT OF EGGSHELL AS A FILLER ON THE MECHANICAL PROPERTIES OF FLEXIBLE POLYURETHANE FOAM

EFFECT OF FOAMING AGENTS ON CRUDE OIL SYSTEM

EFFECT OF PARTICLE SIZE ON OIL YIELD USING SCENT BEAN SEED (‘OZAKI’).

Effect Of Particle Size On Oil Yield Using Scent Bean Seed (‘Ozaki’)

EFFECTS OF FORMATION DAMAGE ON OIL WELL PRODUCTIVITY

ENGINEERING DESIGN AND PREDICTION OF HYDRATE FORMATION FOR A GAS PIPELINE

ENHANCEMENT OF CELLULOSIC ETHANOL PRODUCTION THROUGH ASPERGILLUS NIGER MODIFICATION

ENHANCING LIGHT-ENDS RECOVERY THROUGH JOINT ATMOSPHERIC DISTILLATION OF HEAVY CRUDE AND USED ENGINE OIL

EXTRACTION AND CHARACTERISATION OF CHITIN AND CHITOSAN FOR CHROMIUM (VI) ION REMOVAL FROM WASTEWATER

EXTRACTION AND FORMULATION OF PERFUME FROM LEMONGRASS LEAVES

EXTRACTION AND FORMULATION OF PERFUME FROM PLANT

INVESTIGATION OF THE TRANSPORT PROFILE AND DISPERSION OF ATMOSPHERIC AEROSOL OVER THE COASTAL REGION OF LAGOS

MATHEMATICAL MODELING AND DYNAMIC SIMULATION OF TEMPERATURE DISTRIBUTION IN A CHAMBER FURNACE

MODELLING AND SIMULATION OF A TRAY DRYER USING MATLAB

MODELLING AND SIMULATION OF TRANESTERIFICATION OF WASTE VEGETABLE OIL (FRYING OIL) IN A BATCH REACTOR

MODELLING, SIMULATION AND CONTROL OF A REACTIVE DISTILLATION PROCESS FOR FUEL ADDITIVE PRODUCTION

MODELLING, SIMULATION AND CONTROL OF THE REACTIVE DISTILLATION OF BIODIESEL PRODUCTION

MODELLING, SIMULATION AND OPTIMIZATION OF FATTY ACID METHYL ESTER REACTIVE DISTILLATION PROCESS USING ASPEN HYSYS

MODELLING, SIMULATION AND SENSITIVITY ANALYSIS OF A FATTY ACID METHYL ESTER (FAME) REACTIVE DISTILLATION (RD) PROCESS USING ASPEN PLUS

MODIFICATION OF SURFACE, PHYSICAL AND CHEMICAL PROPERTIES OF ACTIVATED CARBONS FOR WATER PURIFICATION

PID CONTROL OF A FATTY ACID METHYL ESTER REACTIVE DISTILLATION PROCESS

PIPELINE PRODUCTS MARKETING COMPANY (PPMC) DEPOT OPERATIONS

PRODUCTION OF EMULSION PAINT USING DYED CASSAVA STARCH AS PIGMENT

Refining Of Palm Kernel Oil

REFINING OF SOYA BEAN OIL

STUDIES OF REGENERATION OF CATALYTIC REFORMING CATALYST

STUDIES ON THE TREATMENT OF COAL AND BREWERY WASTEWATER USING ADSORPTION AND COAGULATION– FLOCCULATION TECHNIQUES.

STUDYING THE OPTIMAL CONDITIONS FOR GLUCOSE AND BIO-ETHANOL PRODUCTION FROM SPIROGYRA AFRICANA

SYNTHESIS OF IMMOBILIZED MOLYBDENUM CATALYST FOR OXIDATION PROCESSES

THE EFFECT OF TEMPERATURE ON HYDROLYSIS OF CELLULOSE (SAW-DUST)

THE KINETIC STUDY ON HYDROLYSIS OF CELLULOSE (SAW-DUST)

THE PRODUCTION OF YAM FLOUR

THE PRODUCTION OF β – SIALON BY CARBOTHERMAL REDUCTION AND NITRIDATION OF KANKARA CLAY

TRANSESTERIFICATION OF WASTE VEGETABLE OIL USING ANTHILL AS CATALYST

TREATMENT OF WATER FROM BORE HOLE USING MORINGA OLEIFERA SEED AND COMMERCIAL ACTIVATED CARBON