WeCreativez WhatsApp Support
Welcome to Projects Ng Support
if you need help simply reply to this message, we are online and ready to help.

Project File Details


Original Author (Copyright Owner): 

3,000.00

The Project File Details

  • Name: AUTOMOBILE MOTOR VEHICLE CONSTRUCTION
  • Type: PDF and MS Word (DOC)
  • Size: [101 KB]
  • Length: [51] Pages

 

ABSTRACT

This work is an attempt evolve a quicker and easier method of achieving Transportation. This will no doubt save considering human labour and time wasted involved in traditional manual method of transportation.

To achieve this, preliminary experiment was first carried out to determine the optimum speed of the motor vehicle. Various design alternative s for achieving the design solution were sythesized and a choice of an economic method which would satisfy the objective was made. Base on the principles guiding the performance of the motor vehicle, the dimensions and sizes of the various components were established.

Appropriate materials were subsequently selected and fabricated to require sizes. The motor vehicle was then assembled and tested.

After testing, it was found to perform efficiently this satisfying the objective for which it was designed.

TABLE OF CONTENTS

Title Page

Release Page

Letter of Transmittal

Approval Page

Dedication

Acknowledgement

CHAPTER ONE

Introduction

Objective of the Project

Literature Review

CHAPTER TWO

The Chassis

The Components of Chassis

CHAPTER THREE

Engine Details

The Petrol Engine

Component Parts of Engines

Engines Terms

Cycle of Operation

The Fuel System

Engine Cooling System

CHAPTER FOUR

Vehicle Body Work

Properties and Uses of Steel in Vehicle Construction

Welding of Steel

Measurement

CHAPTER FIVE

Cost Analysis

CHAPTER SIX

Conclusion

Recommendation

Reference

CHAPTER ONE

INTRODUCTION

Automobile motor vehicle construction contributed a lot towards the economy of life in such a way that transportation is easier and quicker, with this we determined the distance man could travel, even without load.

This motor vehicle is basically designed for domestic, and industrial use. This motor vehicle designed to operate using internal construction engine, which is the most convenient source of power so far developed for driving road vehicles, which drives its power from the burning of fuel and air inside the engine cylinder.

The internal combustion engine (I.C.E) converts the chemical energy in fuel into heat energy and heat energy into mechanical energy. The heat energy is produced by a chemical reaction between the different elements of fuel and air in other ward burning. This burning of fuel and air takes place inside sealed to expand in all directions. This expansion of gases caused the only movable object (the piston) in the sealed chamber to move down, hence transferring the power produced in the cylinder to the crankshaft  of the  engine and then creating mechanical energy.

 

THE OBJECTIVE OF MOTOR VEHICLE CONTRUCTION

They are general objective of motor vehicle construction.

First, understand the historical and technical development of motor vehicle

Second objective is to understand the fundamental cycles of operation of he period and internal combustion engines.

Third objective is to know the constructional processes of motor vehicle.

Fourth objective is to understand the general principles of the transmission system of vehicle bodies. In order to achieve this we have to know the braking system and their operation principle and understanding the principles of steering mechanisms.

GET THE FULL WORK

DISCLAIMER:
All project works, files and documents posted on this website, projects.ng are the property/copyright of their respective owners. They are for research reference/guidance purposes only and the works are crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a guidance purpose only and not copy the work word for word (verbatim). Projects.ng is a repository of research works just like academia.edu, researchgate.net, scribd.com, docsity.com, coursehero and many other platforms where users upload works. The paid subscription on projects.ng is a means by which the website is maintained to support Open Education. If you see your work posted here, and you want it to be removed/credited, please call us on +2348159154070 or send us a mail together with the web address link to the work, to [email protected] We will reply to and honor every request. Please notice it may take up to 24 - 48 hours to process your request.