Download the complete Chemical Engineering project topic and material (chapter 1-5) titled COMPARATIVE ANALYSIS OF COAL, FUEL OIL AND NATURAL GAS FOR CEMENT PRODUCTION here on PROJECTS.ng. See below for the abstract, table of contents, list of figures, list of tables, list of appendices, list of abbreviations and chapter one. Click the DOWNLOAD NOW button to get the complete project work instantly.
PROJECT TOPIC AND MATERIAL ON COMPARATIVE ANALYSIS OF COAL, FUEL OIL AND NATURAL GAS FOR CEMENT PRODUCTION
The Project File Details
- Name: COMPARATIVE ANALYSIS OF COAL, FUEL OIL AND NATURAL GAS FOR CEMENT PRODUCTION
- Type: PDF and MS Word (DOC)
- Size: [723 KB]
- Length: [68] Pages
ABSTRACT
This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and human health. Out of the seven cement manufacturing industries in Nigeria, three industries use these fuels were selected for the study. The industries are NigerCem –Ebonyi state, Dangote cement –Benue state and UniCem -Cross river state. Questionnaires were used to gather information on the three fuels. The likert 3- scale model was adopted, using 2.0 as the cut off mark. Based on the analysis of the study, it was observed out that amongst these three (3) fuels, fuel oil is presently expensive though available, while coal and natural gas are cheap but coal is not available due to the closure of Nigeria‟s coal mine. In terms of environment and health, coal and fuel oil emit much harmful gases to the environment and cause more health problems to cement worker but natural gas emits less of these harmful gases to the environment and cause less health problems to workers. The study therefore shows that natural gas is the best fuel because it is cheap, readily available and creates fewer problems to the environment.
TABLE OF CONTENTS
Title page
Certification —————————————————————————- ii
Approval ——————————————————————————- iii
Dedication —————————————————————————– iv
Acknowledgement ——————————————————————– v
Abstract ——————————————————————————– vi
Table of contents ———————————————————————- vii
CHAPTER ONE
INTRODUCTION
1.1 Background of study ———————————————————— 1
1.2 Statement of problem ———————————————————— 2
1.3 Aims and objectives ————————————————————- 2
1.4 Significance of study ———————————————————— 3
1.5 Scope of study ——————————————————————– 3
CHAPTER TWO
LITERATURE REVIEW
2.1 Energy source ——————————————————————— 5
2.1.0 Coal —————————————————————————— 5
2.1.1 Fuel oil ————————————————————————– 15
8
2.1.2 Natural gas ——————————————————————— 15
2.2 Cement —————————————————————————- 17
2.2.0 Cement manufacturing processes ——————————————– 18
2.2.1 Major characteristics of cement industry ———————————- 22
2.2.2 Energy challenge in the industry ——————————————– 23
2.2.3 Demand for cement ———————————————————— 25
2.2.4 Emission from cement industry ———————————————- 26
2.3 Conceptual framework ———————————————————– 30
CHAPTER THREE
RESEARCH METHODOLOGY
3.1 Research methods —————————————————————– 31
3.2 Sample procedure/sample size determination ————————— —– 31
3.3 Data collection ————————————————————– —— 33
3.4 Operational measures of the variable ——————————————- 33
3.5 Research analysis —————————————————————– 34
CHAPTER FOUR
PRESENTATION AND ANALYSIS OF DATA
4.1 Data presentation —————————————————————– 35
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
9
5.1 Summary —————————————————————— 50
5.2 Conclusion —————————————————————- 51
5.3 Recommendation ——————————————————– 51
REFERENCE ————————————————————— 53
APPENDIX —————————————————————— 56
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF STUDY
Energy is commonly defined as the ability to do work or to produce heat.
Normally heat could be derived by burning a fuel (i.e. a substance that contains
internal energy which upon burning generates heat). (IEA, 2004).
The energy system today is highly dependent on fossil fuel with coal, fuel oil and
natural gas accounting for about 80% of world primary energy demand. (Kul,
2001).
Fuels are the major source of energy for industries and cement industry is not an
exception. However, the energy source to be adopted will have to meet the varying
needs of different countries and at the same time enhance the security of each
against the energy crisis that have taken place in the past. The selection/ choice of
fuel type depend on various factors such as environmental pollution, ease in
processing, storage and handling, availability and cost of the fuel.
Coal, fuel oil and natural gas are the most commonly used energy carrier in cement
industries. The energy use for cement production is distributed as follows:-
92.7% for pyro-processing
5.4% for finishing grinding and
1.9% for raw grinding (Choate, 2003).
11
The choice of fuel use entails the level at which green house gases (GHG) are
emitted, the cost of cement and the quality of the cement produced.
This research work will help in selecting the best fuel and techniques to be use in
order to attain a high quality product at a lower cost with lesser green house gas
emission to the environment.
1.2 STATEMENT OF PROBLEM
The choice of fuel is attained by comparative analysis of coal, fuel oil and natural
gas in cement production. In comparing these fuels, the following problem arises:-
Knowledge of the physio- chemical properties of coal, fuel oil and natural
gas.
Knowledge of the green houses gases (GHG) emitted by each of these fuel,
their level of emission and their effects on the environment and humans
health (esp. cement workers).
Knowledge of the cost and availability of coal, fuel oil and natural gas.
1.3 AIMS AND OBJECTIVES OF STUDY
The aims of this research work is to;
Study the physical and chemical properties of coal, fuel oil and natural gas.
Gain knowledge on the green house gases (GHG) emitted, their effect on the
environment and humans health and the level of emission from each fuel.
Study coal, fuel oil and natural gas in relation to cost and availability.
12
1.4 SIGNIFICANCE OF THE STUDY
With the growth in industrialization today, this study will offer numerous values both
to the cement industry and staff, the environment and society at large.
It will choose an economical and less hazardous fuel and techniques for cement
production.
Also, it will help in the selection of techniques /fuel that will reduce the emission of
green house gases (GHG) from cement industries to the environment. This gases
emitted causes acid rain, smog etc. which can cause cancer to human and destroys
plant lives.
In terms of infrastructural development, an economical fuel for production will lead
to a reduction in the cost of cement, thereby encouraging the development of
buildings and Government in development of roads, bridges, and other
construction- oriented projects.
This study will also give students of chemical engineering and other related courses
an insight of these fuels with their different environmental implications, properties
and choice of fuel when combustion of fuel is required.
1.5 SCOPE AND LIMITATION
This study would have covered all the Nigerian cement industries but due to time
and cost of analysis, it is limited to three(3) cement industries namely:- Dangote
Cement in Gboko -Benue State, United Cement Company in Calabar – Cross River
State(UniCem), and Nigerian Cement Company in Nkalagu -Ebonyi State
13
(NigerCem) of which each uses Fuel oil, natural gas and coal respectively as
energy source.
The intention of the study is to cover the effects of coal, fuel oil and natural gas in
the production of cement with reference to cost, storage and handling, availability,
product quality and environmental impact.
DISCLAIMER:
All project works, files and documents posted on this website, projects.ng are the property/copyright of their respective owners. They are for research reference/guidance purposes only and the works are crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a guidance purpose only and not copy the work word for word (verbatim). Projects.ng is a repository of research works just like academia.edu, researchgate.net, scribd.com, docsity.com, coursehero and many other platforms where users upload works. The paid subscription on projects.ng is a means by which the website is maintained to support Open Education. If you see your work posted here, and you want it to be removed/credited, please call us on +2348159154070 or send us a mail together with the web address link to the work, to hello@projects.ng. We will reply to and honor every request. Please notice it may take up to 24 - 48 hours to process your request.