The Project File Details
- Name: DESIGN AND IMPLEMENTATION OF A MICROCONTROLLER-BASED VERSATILE Y- AND CROSS-JUNCTION TRAFFIC LIGHT CONTROL SYSTEM/TRAINER
- Type: PDF and MS Word (DOC)
- Size: [612]
- Length: [112] Pages
ABSTRACT
A microcontroller-based Versatile Traffic Light Control System/Trainer has been designed and implemented in the course of this project. The system can control traffic lights in all types of y- and cross-junctions. Two major aspects of the system are the hardware subsystem and the software subsystem. Each subsystem was first broken down into simpler parts or modules and each module was designed from first principles to get the required functional behavior. The entire system was then integrated into one functional unit and tested using a carefully laiddown test plan. The versatility of the system was made possible by the use of a microcontroller which enabled the researcher to use software to achieve a versatile, flexible and cost-effective solution. The system can double up as a training kit for undergraduates that are interested in learning traffic light control system design and operation.
TABLE OF CONTENTS
Title page………………………………………………………i
Certification……………………………………………………..iv
Approval ………………………………………………………. v
Dedication ……………………………………………………..vi
Acknowledgement …………………………………………….vii
Abstract ………………………………………………………..viii
Table of contents ………………………………………………ix
List of Tables……………………………………………………xiv
List of Figures…………………………………………………..xvi
CHAPTER ONE
INTRODUCTION…………………………………………….1
1.1 Background………………………………………………………..1
1.2 Aims and Objectives……………………………………………1
1.3 Justification……………………………………………………..2
1.4 Scope of the Work………………………………………………2
1.5 Block Diagram Overview of the Project Stage………………….3
1.6 Project Outline…………………………………………………..4
x
CHAPTER TWO
LITERATURE REVIEW…………………………………………..5
2.1 Principles ………………………………..…………………….5
2.2 Traffic Light Technologies ………………………………7
2.2.1 Optics and Lighting…………………………………………8
2.2.2 Control Module……………………………………………….15
2.3 Application’s of Versatile Traffic Light Control System……..19
2.4 New Trends…………………………………………………..20
CHAPTER THREE
METHODOLOGY AND SYSTEM ANALYSIS……………………21
3.1 Methodologies………………………………………………..21
3.1.1 Structured Analysis and Design Method…………..………….24
3.1.2 Top-Down Decomposition……………………………………25
3.1.3 Bottom-Up Assembly…………………………………………26
3.2 Method Used In This Work……………………………………..28
3.3 The Design Process……………………………………………29
3.4 Analysis………………………………………………………..30
3.5 Limitations of the Existing Traffic with Control Systems ……32
xi
CHAPTER FOUR
SYSTEM DESIGN……………………………………………….33
4.1 System Specification ……………………………………….33
4.1.1 Versatility of The System…..…………………………………….33
4.1.2 Sequence of Light Changes……..…………………………..34
4.1.3 Timing Requirements of the System……..…………………36
4.1.4 Flexibility Factor…………………..………………………..36
4.2 Hardware Subsystem Design……………………………….37
4.2.1 Input Subsystem …………………………………………….38
4.2.2 The Control Subsystem……..……………………………………39
4.2.3 The Output Subsystem………………………………………44
4.3 The Software Subsystem ………..…………………………..46
4.3.1 Control Algorithms………..………………………………………49
4.4 Project Block Diagram……….……………………………..56
CHAPTER FIVE
SYSTEM IMPLEMENTATION……………….……………….57
5.1 Hardware Subsystem Implementation ……….…………….57
xii
5.1.1 The Input Subsystem Implementation ………..…………60
5.1.2 The Control Subsystem Implementation……………………61
5.1.3 The Output Subsystem Implementation……..…………..66
5.2 Software Subsystem Implementation……………………67
5.3 Data Base Implementation……………………………….68
5.4 System Testing……………………………………………68
5.4.1 Test Plan………………………………………………….68
5.4.2 Hardware Subsystem Testing……………………………69
5.4.3 Software Subsystem Testing…………………………….70
5.5 Performance Evaluation……………………….…………71
5.6 Project Packaging…………………………….………….72
5.7 Project Costing…………………………………………..73
5.8 Project Deployment……………………………………..73
CHAPTER SIX
SUMMARY AND CONCLUSION …………………………74
6.1 Summary Of Achievement……………………………..74
6.2 Problems Encountered and Solutions…………………..74
xiii
6.3 Recommendations………………………………………75
6.4 Suggestion for further Improvement……………………76
6.5 Contribution to Knowledge………………..……………76
6.6 Conclusion………………………………………………77
REFERENCES…………………………………………78
APPENDICES………………………………………….81
Appendix A1: Full Schematic Diagram…………………81
Appendix A2: Pcb Component Layout………………….82
Appendix A3: Pcb Track Layout…………………………83
Appendix B: Source Code……………………………….84
Appendix C: Evidence of Completion…………………94
Appendix D: Operation Manual……………………….95
CHAPTER ONE
INTRODUCTION
1.1 Background
Most roads in Nigeria urban areas are usually congested, some all-day,
others during rush hours. It was found that larger part of this problem is
that due to congestion at road intersections. However, traffic light systems
have long been invented to control this problem. Most of these traffic
light control systems are imported thereby making them expensive.
Traditional traffic light control systems are designed to function at only a
particular type of traffic intersection. For example, a control system that
was designed for a cross-junction may not serve at T-junction.
This project work deals with a microcontroller-based traffic light
control system that has the ability to control any type of y- and cross-
traffic intersections. It is indigenous as well as versatile in its control
functions as regards y- and cross-junctions. This has the effect of
drastically reducing the design cost.
1.2 Aim and Objectives
This project aims at developing an 8051 microcontroller-based versatile
y- and cross- traffic light control system which can be deployed at road
2
intersections for traffic control. It can be used as a teaching aid in schools
for various road users. The purpose of this project work is to develop a
versatile system that can control any type of cross- and y-traffic junctions
to assist and to educate the general public on automobile-automobile and
automobile-pedestal interactions at road intersections.
1.3 Justification
Since this work is indigenous, it can serve to replace the imported ones. It
can also reduce the cost of design and implementation since addition of
few instruction lines to the control program will make the control system
function at any type of road intersection. The software program for this
system can be modified to incorporate more functionality. This
system/trainer also serves as a learning aid.
1.4 Scope of the Work
This versatile traffic light control system is intended to control a wide
range of y- and cross- road intersections. In this work, we limit ourselves
to the control of the following types of traffic junctions:
3
Automobile-automobile cross-junction
Automobile pedestrian cross-junction
Automobile-automobile Y-junction using LEDs
Automobile-automobile Y-junction using lamps via dc relays
This project work is flexible in that the control program can be modified
to incorporate other types of traffic junction control.
1.5 Block Diagram Overview
Fig. 1: Block Diagram Overview
As indicated in Fig. 1 above, the input subsystem comprises a switch
panel that passes input signals to the control system which in turn invokes
control algorithm from the system’s memory for its control operations.
The input signal is used to configure the system to behave as a particular
type of traffic junction controller. The user can select one out of
INPUT SUBSYSTEM
CONTROL SUBSYSTEM
OUTPUT SUBSYSTEM
CONTROL ALGORITHM (IN MEMORY)
4
the four types of junction controls at the time of configuration prior to
installation of the panel. When used as a trainer, selection is also made in
a similar manner.
The timing signals are used to control the sequencing of light. The light
change cycles through GREEN, AMBER and RED in response to the
timing requirements of the system.
1.6 Project Outline
This project work is organized as follows: chapter one is on introduction
while chapter two deals with a review of some related literature.
Methodology and systems analysis is the subject of chapter three while
chapter four covers hardware and software design details. Chapter five is
concerned with system implementation and testing while summary and
conclusion is the subject of chapter six.
DISCLAIMER:
All project works, files and documents posted on this website, projects.ng are the property/copyright of their respective owners. They are for research reference/guidance purposes only and the works are crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a guidance purpose only and not copy the work word for word (verbatim). Projects.ng is a repository of research works just like academia.edu, researchgate.net, scribd.com, docsity.com, coursehero and many other platforms where users upload works. The paid subscription on projects.ng is a means by which the website is maintained to support Open Education. If you see your work posted here, and you want it to be removed/credited, please call us on +2348159154070 or send us a mail together with the web address link to the work, to hello@projects.ng. We will reply to and honor every request. Please notice it may take up to 24 - 48 hours to process your request.