Project File Details


Download the complete Electrical and Electronics project topic and material (chapter 1-5) titled DESIGN_AND_CONSTRUCTION_OF_AN_INVERTER_TYPE_ARC_WELDING_MACHINE here on PROJECTS.ng. See below for the abstract, table of contents, list of figures, list of tables, list of appendices, list of abbreviations and chapter one. Click the DOWNLOAD NOW button to get the complete project work instantly.

 

3,000.00

The Project File Details

  • Name: DESIGN_AND_CONSTRUCTION_OF_AN_INVERTER_TYPE_ARC_WELDING_MACHINE
  • Type: PDF and MS Word (DOC)
  • Size: [733 KB]
  • Length: [45] Pages

CHAPTER ONE

INTRODUCTION
1.1 THE BACKGROUND
Welding is a way of heating pieces of metal using electricity or a flame so
that they melt and stick together. It can simply be defined as the process of joining
two or more pieces of metal to make the act as a single piece. This is often done
by melting the work pieces and adding a filler material to form a pool of molten
material that cools to become a strong joint. Because of its strength, welding is
used to join beams when constructing buildings, bridges and other structures.
Welding can also be used to join pipes in pipelines, power plants at the
construction sites and in home appliance. Furthermore, welding is used in
shipbuilding, automobile manufacturing and repair, aerospace applications. There
are many kinds of welding which include arc welding, resistance welding, gas
welding among others. Emphasis will be laid on arc welding because it is the most
common type of welding as well as the main aim of this project.
Arc welding is the process of welding that utilizes an electrical discharge
(arc) to join similar materials together. Equipment that performs the welding
operation under the observation and control of a welding operator is known as
welding machine. To solve the problem of weight and size of conventional arc
2

welding machine, it is necessary to design an inverter. The inverter provides much
higher frequency than 50Hz or 60Hz supply for transformer used in welding. So
transformer of much smaller mass is used to permit the handling of much greater
output power. The welding noise produce by conventional arc welding machine is
reduced by selecting the operating frequency over the hearing of human ability.
The choice of 20Khz for the inverter type arc welding machine was determined to
meet the above expectation. The output welding current is controlled by
controlling the power supply for transformer at high frequency. This power supply
is provided by a frequency inverter. Power switch IGBTs (Insulated Gate Bipolar
Transistor) or MOSFETs is used for the inverter design due to its high switching.
The control circuit use to control the output welding current is design to drive the
power switch at high frequency. Insulated Gate Bipolar Transistor power switch is
more efficient and less prone to failure than MOSFETs power switch.
1.2 AIMS AND OBJECTIVES OF THE PROJECT
The main aim and objective of this project is to design and build and arc
welding machine that operates on 36vdc at variable frequency which of benefit to
urban area. This reduces the weight and size of the transformer use for welding.
To have an arc welding machine that is more efficient which produce neat
welding.

3

1.3 SIGNIFICANT OF THE STUDY
The significant of this project is that it seeks to develop an arc welding
machine that is cost effective, strong and portable. Not only that the arc welding
machine is strong and portable, it is also mobile.
1.4 LIMITATION OF THE PROJECT
The project has certain limitations which are mentioned below.
 This project cannot weld bigger gauge of metals.
 The welding time and power depends on the battery input power.
 You are to have bands of battery for reliability when using battery.
 The machine must be used by a qualified welder. Welding can endanger the
operator or people near the working area. Therefore, the performance of welding
and cutting must only be done under the comprehensive observation of all relevant
safety regulation.
 Switch function modes during welding could potentially damage the equipment. A
safety switch is necessary to prevent the equipment from electric leakage. Use
only high quality welding tools and equipment with this inverter type arc welding
machine.

4

1.5 PROJECT REPORT ORGANIZATION
The organization of the project report is well detailed and vast in its coverage. It
covers all the activities encountered during the research work. The first chapter is
the introductory chapter which covers the background, project objectives, project
justification, and scope of the project. Chapter two presents the literature reviews.
Chapter three covers the system analysis and design methodology in details.
Chapter four presents the system implementation which entails the circuits
diagram of different stages and also the complete schematic diagram with
necessary calculation involve in the design. Chapter five is emphasis on
conclusion, problem encountered during project design, recommendations and
suggestion for further improvement. Fig1.1 depicts an overview of project report
organization.

5

Introduction
Literature review
Methodology and system analysis
System Design and Implementation
System testing
Summary, recommendation and conclusion
Fig1.1 An overview of project report organization

GET THE FULL WORK