Download the complete Chemical Engineering project topic and material (chapter 1-5) titled MODIFICATION OF SURFACE, PHYSICAL AND CHEMICAL PROPERTIES OF ACTIVATED CARBONS FOR WATER PURIFICATION here on PROJECTS.ng. See below for the abstract, table of contents, list of figures, list of tables, list of appendices, list of abbreviations and chapter one. Click the DOWNLOAD NOW button to get the complete project work instantly.
PROJECT TOPIC AND MATERIAL ON MODIFICATION OF SURFACE, PHYSICAL AND CHEMICAL PROPERTIES OF ACTIVATED CARBONS FOR WATER PURIFICATION
The Project File Details
- Name: MODIFICATION OF SURFACE, PHYSICAL AND CHEMICAL PROPERTIES OF ACTIVATED CARBONS FOR WATER PURIFICATION
- Type: PDF and MS Word (DOC)
- Size: [580 KB]
- Length: [75] Pages
ABSTRACT
The purpose of this work was to study the effect of chemical surface properties of
activated carbons for their use in water purification. To achieve this objective,
activated carbon in both granular and powdered forms namely: as received and
devolatilized carbons were prepared. Proximate analysis of the carbon materials
was performed. Mass titration experiments were carried out to determine the point
of zero charge of the activated carbon materials. Again, using an ultraviolet
spectrophotometer, the adsorption of phenol on as-received and devolatilized
activated carbon was investigated. Adsorption isotherms were acquired from which
the monolayer adsorption capacities were calculated.
TABLE OF CONTENTS
Title page……………………………………………………….………….i
Approval page……………………………………………………………..ii
Dedication…………………………………………………………………iii
Acknowledgement…………………………………………………….…..iv
Abstract…………………………………………………………………….v
Table of contents…………………………………………………………..vi
List of Tables………………………………………………………………xi
List of Figures……………………………………………………………..xiii
CHAPTER ONE: INTRODUCTION…………………………………….1
1.1 Origin and nature of activated ………………………………………….1
1.2 Methods of manufacture of activated carbon……………………………2
1.3 Need for present investigation………………………………………..…3
1.4 Objectives and Scope of the study………………………………….…4
CHAPTER TWO: LITERATURE REVIEW………………..…………6
CHE/2007/063 7
2.1 Preamble……………………………………………………………….6
2.2 The adsorption process………………………………………………..6
2.3 Historical background of activated carbon……………….………………….7
2.4 Raw materials for the production of activated carbon………………………9
2.5 Activated carbon manufacturing process……………………………………9
2.5.1 Thermal processing technique……………………………………….….10
2.5.2 Chemical activation technique …………………………………………13
2.5.3 Steam activation technique………………………………………………13
2.6 Properties of activated carbon…………………………………………….14
2.6.1 Physical properties……………………………………………….………15
2.6.2 Chemical properties…………………………………….………….……15
2.7 Structure of activated carbon………………………………….…………..17
2.8 Applications of activated carbons……………………….…………..……19
CHAPTER THREE: EXPERIMENTAL………………………………..……22
3.1 Selection of materials…………………….………………………………22
CHE/2007/063 8
3.1.1 Selection of activated carbon material……..…………………………..22
3.1.2 Selection of adsorbate…………………….……………………………22
3.2 Apparatus used………………………..…………………………………22
3.3 Reagents used……………………………………………………………23
3.4 Modification of the activated carbon………………….…………………..24
3.4.1 Devolatilization of the coconut shell based activated carbon………..…24
3.4.2 Treatment of the activated carbon with nitric acid…………………..…24
3.5 Mass titration……………………………………………………….……..25
3.6 Proximate analysis of the activated carbon material…..………………….26
3.6.1 Moisture content…………………………………………………….….26
3. 6.2 Volatile matter content……………………..……………………….…26
3.6.3 Ash content………………………………………………………..……26
3.6.4 Fixed carbon…………………………………………………………….27
3.7 Adsorption experiment………………………………………………..….27
CHAPTER FOUR: RESULTS AND DISCUSSION………………….…28
CHE/2007/063 9
4.1 Mass titration………………….….…………………………………..….28
4.2 Proximate analysis……………………………………………………….36
4.3 Adsorption isotherms………………………….……………………..….37
4.4 Surface coverage.………………………………………………………..45
4.5 Discussion of results…………………………………………………….46
4.5.1 Mass titration…………………………………………………………46
4.5.2 Proximate analysis……………..…………………………….………….46
4.5.3 Adsorption isotherms and surface coverage………………………………………47
CHAPTER FIVE: CONCLUSION AND RECOMMENDATIONS……..49
5.1 Conclusion…………………….…………………………………………..49
5.2 Recommendations…………………..……………………………..………50
References……………………………………………………….………..51
Appendix A………………………………………………………..………53
Appendix B…………………………………………..………………..….55
Appendix C…………………………………………….……………….…60
CHAPTER ONE
INTRODUCTION
1.1 ORIGIN AND NATURE OF ACTIVATED CARBON
Carbon is the fifteenth most abundant element in the earth’s crust and the fourth
most abundant element in the universe by mass after hydrogen, helium and
oxygen. Scientists, industries, and consumers use different forms of carbon and
carbon containing compounds in many ways such as activated carbon or carbon in
its active form which can be used to purify water, among others.
Activated carbon is a form of carbon that has been produced to make it extremely
porous and thus have a very large surface area available for adsorption or chemical
reactions.
It can be defined as a microcrystalline non-graphitic amorphous form of carbon
which has been processed to develop a high internal porosity due to its network of
inter-connecting pores.
The history of activated carbon is dated since the fifteenth century, during the
time of Columbus when sailors used to blacken the inside of wooden water barrels
with fire, since they observed that the water would stay fresh much longer. It is
likely that people at that time proceeded by intuition only without having any
CHE/2007/063 14
insight into the mechanism of the effect. The mechanism was recognized
beginning from the eighteenth century.
In 1862, Lipscombe prepared a carbon material for purifying portable water. This
development paved the way for the commercial application of activated carbon
first for portable water and then in waste water sector.
1.2 METHODS OF MANUFACTURE OF ACTIVATED CARBON
The methods employed in the industrial manufacture of activated carbons are
numerous but consist of three main methods namely; Chemical activation, Steam
activation and thermal processing techniques.
The raw materials or precursors used in the manufacture of activated carbon are as
follows; Softwood, coconut shell, lignite, hardwood, grain and agro products,
bituminous coal, anthracite, etc.
Chemical activation is generally used for the production of activated carbon from
sawdust, wood or peat and uses chemicals for activation. Chemical activation
technique involves mixing an inorganic chemical compound with the carbonaceous
raw materials and the most widely used activating agents are Phosphoric acid and
Zinc Chloride.
CHE/2007/063 15
Steam activation technique is generally used for coal-based, coconut shell and
grain-based activated carbons and uses gases, vapors or a mixture of both for its
activation.
Thermal processing technique is a separation process that removes unwanted
materials from the carbonaceous precursor used under varying heat applications.
This technique is at a lower cost compared to the two techniques above and meets
all environmental standards, while others need expensive solutions to achieve the
same results.
1.3 NEED FOR PRESENT INVESTIGATION
The need for present investigation of this material cannot be over emphasized. This
is as a result of the pressing need for treatment of waste water emanating from
domestic and industrial concerns.
Activated carbon plays an important role in the purification of fluids (water),
including vegetable oils used in domestic cooking and as a precursor in industrial
manufacture of food products. The slow pace of technological development in the
country has resulted to the expenditure of the nation’s resources on importation of
activated carbons to meet the demand for local chemical and process industries, as
well as the demand for municipal and industrial water treatment plants.
CHE/2007/063 16
Rapid industrialization, together with the increase in modern methods of
agriculture and the increase in population, has contributed to the pollution of the
ecosystem. Most of the pollutants are toxic to living organisms. It is therefore
imperative that waste water has to be treated to remove the toxic materials before
disposal to the environment. Most methods of treating water have some inherent
shortfalls. Activated carbon treatment was therefore developed because of its
effectiveness in pollutants removal, especially in water purification.
1.4 OBJECTIVES AND SCOPE OF THE STUDY
The primary objectives and scope of the present investigation include the
following:
i. Acquisition of the different types of activated carbons available to the nation’s
chemical industry.
ii. Modification of the surface physical and chemical properties of the carbon
material, for their use in liquid phase applications.
iii. Determination of the physical properties of the as-received and modified
activated carbon materials.
iv. Testing the adsorption capacity of the carbon materials in adsorption processes.
v. Evaluation of the fractional surface coverage for each carbon material.
CHE/2007/063 17
vi. Proposal of a scheme for the optimal modification of activated carbon material
for optimal application in liquid phase adsorption.
DISCLAIMER:
All project works, files and documents posted on this website, projects.ng are the property/copyright of their respective owners. They are for research reference/guidance purposes only and the works are crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a guidance purpose only and not copy the work word for word (verbatim). Projects.ng is a repository of research works just like academia.edu, researchgate.net, scribd.com, docsity.com, coursehero and many other platforms where users upload works. The paid subscription on projects.ng is a means by which the website is maintained to support Open Education. If you see your work posted here, and you want it to be removed/credited, please call us on +2348159154070 or send us a mail together with the web address link to the work, to hello@projects.ng. We will reply to and honor every request. Please notice it may take up to 24 - 48 hours to process your request.