Download the complete biochemistry project topic and material (chapter 1-5) titled Optimization Of Biodiesel Production From Yellow Oleander And Castor Oils And Studies Of Their Fuel Properties here on PROJECTS.ng. See below for the abstract, table of contents, list of figures, list of tables, list of appendices, list of abbreviations and chapter one. Click the DOWNLOAD NOW button to get the complete project work instantly.
The Project File Details
The optimization of biodiesel production from two non-edible oils and studies of their fuel and biodegradability properties was carried out. The two oil feedstocks (Yellow oleander and Castor oils) were extracted from their seeds using an oil expeller and their physicochemical properties such as iodine value, moisture content, saponification value, acid value, viscosity, specific gravity and refractive index were determined. Most of these properties were within the acceptable limit of American Standard Testing Method (ASTM). The methyl esters were optimized using methanol as solvent and by varying conditions like reaction temperature, reaction time, type and concentration of catalyst, molar ratio of methanol and oil. For maximum bio diesel production, the transesterification reaction showed that the concentration of alkali catalyst was 0.8 % sodium hydroxide, 0.33 %v/v alcohol/oil ratio, 1 hr reaction time, 60 0C temperature and excess alcohol 150 %v/v. Optimized parameters for production of biodiesel through base catalyzed transesterification gave maximum yield of 96 % and 98 % for yellow oleander and castor oil respectively. The Yellow Oleander Methyl Ester (YOME) and Castor Oil Methyl Ester (COME) and their diesel blends were comparatively analysed for fuel properties such as flash point, relative density, kinematic viscosity, calorific value, distillation, sulphur, phosphorous, water content, cetane number and acid number . The methyl ester of yellow oleander was found to have properties closer to ASTM D 6751 fuel specifications than that of castor oil. It is further observed from the results that the biodiesel from yellow oleander and castor oil are environmentally friendly, such that after spillage, it will take about 28 days for them to have biodegradability of 82.4 and 87.3 for YOME and COME respectively. This is an advantage over petro-diesel which was found to have biodegradability of 25.29 in 28 days.
Table of Contents
List of Abbreviations and Symbols
1.1 Statement of Research Problem
1.2 Justification for Research
1.3 Aims and Objectives
2.0 LITERATURE REVIEW
2.1 Biodiesel as an Alternative to Petroleum Diesel
2.2 Performance Characteristics of Biodiesel
2.3 Biodiesel Storage Stability
2.4 Biodiesel Production
2.5 Optimization of Transesterification Process
2.5.1 Catalyst type and concentration
2.5.2 Effect of free fatty acid and moisture
2.5.3 Effect of reaction time and temperature
2.5.4 Mixing intensity
2.5.5 Molar ratio of alcohol to oil and type of alcohol
2.5.6 Effect of using organic solvents
2.6 Transesterification under different Conditions
2.7 Biodiesel Properties
2.7.1 Flash point
2.7.3 Cloud and pour point
2.7.4 Specific gravity
2.7.5 Calorific value
2.7.7 Cetane number
2.7.8 Carbon residue
3.0 MATERIALS AND METHODS
3.2 Preparation of Solutions
3.2.1 Preparation of 1% v/v phosphoric acid solution
3.2.2 Preparation of 1 M sodium hydroxide solution
3.2.3 Preparation of 1M sulphuric acid solution
3.2.4 Preparation of 0.1M potassium hydroxide solution
3.2.5 Preparation of 0.8 % w/w sodium hydroxide solution
3.2.6 Preparation of 10 % potassium iodide solution
3.2.7 Preparation of 0.1N sodium thiosulphate solution
3.2.8 Preparation of 0.1M hydrochloric acid solution
3.3 Sample Collection and preparation
3.5 Refining Process
3.6 Determination of Acid Value of the Oils
3.7 Determination of Percentage Free Fatty Acid Content
3.8.1 Acid esterification (Step I)
3.8.2 Alkaline transesterification (Step II)
3.9 Test Methods for Physico-Chemical Properties
3.9.1 Kinematic viscosity
3.9.2 Density/API gravity measurement
3.9.3 Acid value
3.9.4 Iodine value
3.9.5 Peroxide value
3.9.6 Pour point
3.9.7 Cloud point
3.9.8 Sulphur content
3.9.9 Water content
3.9.10 Saponification value
3.9.11 Refractive index
3.9.12 Free and total glycerin
3.9.13 Flash point
3.9.14 Distillation characteristics
3.9.15 Cetane index
3.10 Biodegradation Study of the Biodiesels
3.11Fuel Blends Preparation
4.1 Result of Phytochemical Properties
4.2 Result of
4.2.1 Result of acid esterification 4.2.2 Result of transesterification (Step II)
4.3 Result of Characterization of Biodiesel Produced
4.4 Effect of Blending on fuel properties of the Biodiesels
4.5 Result of Distillation of Yellow Oleander and Castor oil methyl esters
4.6 Result of Biodegradability studies of Biodiesel
5.0 DISCUSSION OF RESULTS
5.1 Percentage oil yield
5.2. Physiochemical Properties of Yellow oleander and Castor oil
5.3 Process Optimization
5.3.1 Acid esterification (Step I)
5.3.2 Transesterification (Step II)
5.4 Characterization of Biodiesel produced
5.5 Effect of Blending on Fuel properties of the Biodiesels
5.6 Distillation Characteristic of the Biodiesels produced
CHAPTER SIX, CONCLUSION AND RECOMMENDATIONS
The world energy sector depends on the petroleum, coal and natural gas reservoirs to fulfill its energy requirements (Meher et al., 2006). Nigeria is traditionally an energy-deficient country which exports above 70% of its crude oil production. The country is dependent upon import of petroleum products to sustain its growth. Diesel fuel plays an essential function in the industrial economy of Nigeria. The fuel is used in heavy trucks, city transport buses, electric generators, farm equipment etc. (Anjana, 2000). However, diesel engine also emits various forms of pollutants into the environment which can endanger human health and damage the ecological environment (Antolin et a.l, 2002). It is therefore essential that the world extend its interest towards new sources of energy. A relatively new alternative that is currently booming worldwide is fuel obtained from renewable resources or biofuel. Biofuels are well suited for decentralized development i.e can be utilised to meet the needs for social and economic progress, especially in rural communities where fossil fuels may be difficult or expensive to obtain (Nwafor and Nwafor, 2000; Ezeanyananso et al., 2010).
Amongst the various alternative fuels which could match the combustion features of diesel oil and can be easily adapted for use in existing engine technologies with or without any major modifications is biodiesel. Biodiesel fuel produced from vegetable oils (both edible and non edible) or animal fats is one of the promising possible sources that can be substituted for conventional diesel fuel and produces favourable effects on the environment. Biodiesel is recommended for use as a substitute for petroleum diesel mainly because it is a renewable, domestic resource with an environmentally friendly emission profile and is readily available and biodegradable (Zhang et al., 2003).
The research and use of biodiesel fuel as an alternative started in the 1980’s and the reason was the diesel crisis caused by the reduction of petroleum production by the Organization of Petroleum Exporting Countries (OPEC) and the resultant price hike. The biodiesel produced from locally available resources offer a great promise for future application in Nigeria as it can help in attaining much needed energy security and being environment friendly, will help to conform to stricter emission norms (Ezeanyananso, 2010).
Castor plant (Ricininus communis)
Ricinus communis (Plate I) is a species that belongs to the Euphorbiaceae family and it is commonly known as castor oil plant, and Palma christi. Castor oil is possibly the plant oil industry’s most underappreciated asset. It is one of the most versatile of plant oils, being used in over ten diverse industries.
Owing to its unique chemical composition and structure, castor oil can be used as the starting material for producing a wide range of end-products such as biodiesel, lubricants and greases, coatings, personal care and detergent, surfactants, oleo chemicals e.t.c. Compared to many other crops, castor crop requires relatively fewer inputs such as water, fertilizers and pesticides. The crop can also be grown on marginal land, thus providing an excellent opportunity for many regions of the world to utilize their land resources more productively (Dokwadanyi, 2011). The plant prefers well-drained moisture relative clay or sandy loan in full sun requires a rich soil and day time temperature above 20oC for seedling to grow well. Castor is native to tropical Africa but it grows widely in Nigeria as weed it can be found in Borno, Sokoto, Jos, Zaria and so many other places in the country (Dokwadanyi, 2011). Though, it has been reported that the plants is not properly exploited, however a fiber for making ropes can be obtained from its stem. The growing plant is said to repel flies and mosquitoes when grown in the garden and it is also said to rid it of moles and nibbling insect, while the leaves have insecticidal properties. (Abdulkareem et al, 2012).
Thevetia plant (Thevetia peruviana)
Thevetia peruviana (Plate II) is an ever – green ornamental dicotyledonous shrub that belongs to Apocyanaceae family (Dutta, 1964). It is commonly found in the tropics and sub – tropics but it is native to Africa, Central and South America. It grows to about 10 – 18 feet high, the leaves are spirally arranged, linear and about 13 – 15 cm in length. There are two varieties of the plant, one with yellow flowers, yellow oleander, and the other with purple flowers, nerium oleander. Both varieties flower and fruit all the year round providing a steady supply of seeds. Grown as hedges, they can produce between 400 – 800 fruits per annum depending on the rainfall pattern and plant age. The flowers are funnel-like with petals that are spirally twisted. The fruits are somewhat globular, with fleshy mesocarp and have a diameter of 4 – 5 cm. The fruits are usually green in colour and become black on ripening. Each fruit contains a nut which is longitudinally and transversely divided. The fruit contains between one to four seeds in its kernel, and the plants bears milky juice in all organs. In Nigeria, Thevetia peruviana has been grown for over fifty years as an ornamental plant in homes, schools and churches by missionaries.
Plate II: Thevetia plant (yellow oleander) and explorers (Ibiyemi et al., 2002). All parts of the plant are toxic, due to the presence of glycosides. The toxicity of the glycoside is reflected in the accidental poisonings that occur among children that feed on the seed of the plants (Brewster 1986; Shaw and Pearn 1979). Some adults have reportedly died after consuming oleander leaves in herbal teas (Haynes et al., 1985). According to Saravanapavanatha (1985), the kernel of about ten fruits may be fatal to an adult while kernel of one fruit may be fatal to children. Generally, small children and livestock are at higher risk of Thevetia peruviana poisoning Livestock poisoning after consuming thevetia has been reported by various workers. For instance Singh and Singh (2002) reported that leaf, stem and bark extracts of the plant killed fish. These extracts together with seed kernel extract also caused poisoning symptoms and death of albino rats (Oji and Okafor, 2000). Pahwa and Chartterjee (1990) reported 80 and 90% mortality of rats that were fed on 20 and 30% kernels of thevetia seed after ten days of feeding.
1.1 Statement of Research Problem
The use of vegetable oil for biodiesel production may result in increases in price of food or lead to food shortages (Ezeanyanaso et al., 2010). Fortunately, non-edible vegetable oils, mostly produced by seed-bearing trees and shrubs can provide an alternative, with no competing food uses. Crude non-edible oils however have high free fatty acid (FFA) content, which affects biodiesel yield and capital cost. These oils can be pre-refined by reducing the free fatty acid content (FFA) using esterification and saponification processes. The fuel properties of biodiesel differ from those of petro-diesel fuels. This implies that different engine performance and emissions will occur when biodiesel is used in diesel engines (Carraretto et al., 2004).
Compared to petroleum-based diesel, the high cost of biodiesel is a major barrier to its commercialization; its cost is 150% more than that of petroleum-based diesel depending on feedstock used. Approximately 70-95% of the total biodiesel production cost arises from the cost of feedstock, solvent and refining process of the crude oil (Hass et al., 2006; Umer and Farooq, 2008).
Previous work on biodiesel has not quantified the biodegradability of Castor oil biodiesel. Furthermore, work is still ongoing by scientists on better methods of optimization of Biodiesel.
Energy is the main driver of socio-economic growth of any nation. It plays a vital role in the overall frame work of development worldwide. Energy is an indispensable commodity and all aspect of human activities is hinged to it, It is also as a factor of production whose cost directly affects price of other goods and services (OPEC, 1994). Access to energy has been described as a key factor in industrial development and in providing vital services that improve the quality of life as well as the engine of economic progress (Singh and Sooch, 2004).
Diesel fuels produced from vegetable oils have practically no sulphur content, no green house gases emissions especially with CO2, offer no storage difficulty, and they have excellent lubrication properties. Moreover, vegetable oils, yielding trees absorb more carbon dioxide from the atmosphere on burning (Erhan and Sharma, 2006). Hence, diesel fuels essentially help to alleviate the increasing carbon dioxide content in the atmosphere. With this development, there has been a renewed focus on vegetable oils to make biodiesel fuels (Kim et al., 2004).
The substitution of diesel oil by renewable fuels produced within the country would generate higher foreign exchange savings, even for the major oil exporting countries like Nigeria. Therefore developing countries can use this kind of project not only to solve their environmental problems but also to improve their economy (Ezeanyananso et al.,
2010). There is need for the production of biodiesel using a cheaper reagent, which contributes to the reduction of capital, and manufacturing cost. Furthermore, more investigations are needed about the fuel properties of biodiesels, diesel fuels and their blends before using in a diesel engine (Hass et al., 2006).
The aim of this research is to produce biodiesel from non-edible oils, optimize methods and compare physico-chemical properties of the biodiesels. Specific objectives are to:
All project works, files and documents posted on this website, projects.ng are the property/copyright of their respective owners. They are for research reference/guidance purposes only and the works are crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a guidance purpose only and not copy the work word for word (verbatim). Projects.ng is a repository of research works just like academia.edu, researchgate.net, scribd.com, docsity.com, coursehero and many other platforms where users upload works. The paid subscription on projects.ng is a means by which the website is maintained to support Open Education. If you see your work posted here, and you want it to be removed/credited, please call us on +2348159154070 or send us a mail together with the web address link to the work, to [email protected] We will reply to and honor every request. Please notice it may take up to 24 – 48 hours to process your request.