Download the complete Electrical Engineering project topic and material (chapter 1-5) titled The construction of a 2kva automatic voltage regulator (avr)here on PROJECTS.ng. See below for the abstract, table of contents, list of figures, list of tables, list of appendices, list of abbreviations and chapter one. Click the DOWNLOAD NOW button to get the complete project work instantly.
PROJECT TOPIC AND MATERIAL ON The construction of a 2kva automatic voltage regulator (avr)
The Project File Details
- Name: The construction of a 2kva automatic voltage regulator (avr)
- Type: PDF and MS Word (DOC)
- Size: [129KB]
- Length:  Pages
The AVR is automatic voltage regulator and it is a device which is used to regulate or stabilize electrical power supply for electrical or electronic appliances
In this project, therefore, we are interested in the construction of this all important device. Furthermore, we shall discuss the techniques, processes, switching stages and then the working principle of the automatic voltage regulator
Chapter one of this project dwells on the introduction of the project topic. It also talks about the objectives of the project, bringing to mind what we intend to achieve at the end
Chapter two of the project reviews the research works that have been carried out by some other people in this study area. It also discusses on some of the components used in this project
Chapter three gives a detailed account of the basic construction and the operation of the AVR. It also highlights on some other components used, discussing their working principles using both the circuit and block diagrams
Chapter four of this project draws the conclusion and consequently gives the recommendation on how to better the operation of the AVR. It also includes the references and articles consulted in the course of this project.
TABLE OF CONTENTS
Certification page i
Table of content v-vi
1.1 Introduction to automatic voltage regulator 1-3
1.2 Objectives of the project 3-4
2.0 Literature review 5-7
2.1 Some of the components used 8
2.2 Resistors 8-9
2.3 Capacitors 10
2.4 Transistors 11-12 2.5 Relays 13-14
3.0 Basic construction and operation of the automatic
Voltage Regulator AVR 15
3.1 Components 15
3.2 Transformers 15-18
Circuit diagram of the AVR 19
3.3 The working principle 19-21
3.4 The main function of the AVR 23-25
3.5 The need for voltage regulation/stabilization 25-26
4.0 Conclusion and recommendation 27
4.1 Conclusion 2728
4.2 The importance of voltage Regulation 28-30
4.3 Recommendation 30
- INTRODUCTION TO AUTOMATIC VOLTAGE REGULATORS.
Automatic voltage regulators (AVR) in power supply unit is a device which is used to regulate or stabilize electrical power supply for electrical or electronic appliances. This device helps automatically to keep the voltage level from the public power supply system constant. In other words, the minimum and maximum ranges of voltage are maintained in order to achieve a constant output of 220V.
These devices also serve as a protective device for appliances connected directly to it, while the AVR is connected directly to the public supply. The protective system in AVR either regulate or stabilize it to 220V output for the safety of our appliances or the fuse in the AVR will rupture by excess current of the surge and thereby cut-off the incoming power supply.
The stabilization and regulation is achieved through the control circuit which include relays and other components of various voltages from the secondary winding of the auto-transformer used in this project work.
This control circuitry does the work of cut and boost in the case of higher and lower voltage respectively. If the supply voltage drops below 220V down to 180V,the primary control does the work of the boost which brings the output to normal , while when the voltage increases beyond 220V up to 260V ( which is not ideal), it does the work of cut. The coils of the relay are triggered by the 11.5V D.C from the last stage of the operational Amplification. By this arrangement, an improved automatic voltage regulation is achieved and, is hereby presented in this project.
Different techniques have been employed in the design of AVR circuits in recent times but, in the design and construction of this particular type, high rise voltage, excess current due to dangerous condition externally like lightening effect which may appear on the power supply lines were effectively isolated. The system chips and fragile devices were protected likewise low voltage fluctuations make-brake power supply from public power supply were taken good care of in this AVR construction.
1.2 OBJECTIVE OF THIS PROJECT
The automatic voltage regulator of rating 2KVA is a natural choice for remote control device for the consistent voltage level fluctuation of our power supply system. Therefore, we bear the following in mind as our objective while carrying out this project;
1). To fully understand the automatic means of controlling and regulating the system, Its practices, design, construction, operation and application in public electric power system engineering
2). to test the electric power behavior of systems or appliances connected to AVR. Also to perform both practices network computers, televisions, amplifier sets and other sensitive devices intended to be protected from direct connection to public electric power supply.
3). to practically engage in and fully understand the AVR operational modes and technology or configuration in electrical design and construction
4). To enhance power regulation and stabilization technology via automatic voltage regulation for our electrical and electronics appliances due to voltage variation and, incessant power –fluctuations.
All project works, files and documents posted on this website, projects.ng are the property/copyright of their respective owners. They are for research reference/guidance purposes only and the works are crowd-sourced. Please don’t submit someone’s work as your own to avoid plagiarism and its consequences. Use it as a guidance purpose only and not copy the work word for word (verbatim). Projects.ng is a repository of research works just like academia.edu, researchgate.net, scribd.com, docsity.com, coursehero and many other platforms where users upload works. The paid subscription on projects.ng is a means by which the website is maintained to support Open Education. If you see your work posted here, and you want it to be removed/credited, please call us on +2348159154070 or send us a mail together with the web address link to the work, to [email protected] We will reply to and honor every request. Please notice it may take up to 24 - 48 hours to process your request.